Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Timing Belt of the Ford Fiesta 1.4

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Timing belt

See other generations:
This video is currently unavailable

Today, we will look at the main steps for dismantling and replacing the timing belt of the Ford Fiesta 1.4 petrol. First, open the bonnet and begin to disconnect the injector control unit; then, subsequently remove the engine mount, followed by the timing cover, as shown in the video.

At this point, take the necessary references for the removal and subsequent reassembly of the timing belt, installing the original one; then reassemble all components, applying the reverse procedure!


Updated on 22 September 2026 by ScegliAuto


Related tutorials

Guide to replacing the timing belt on the Ford Fiesta 1.0 Ecoboost
Guide to replacing the timing belt on the Ford Fiesta 1.0 Ecoboost
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) The main instructions in this guide will illustrate the procedure for replacing the timing belt on the Ford Fiesta 1.0 Ecoboost. First, open the bonn…
Guide to Replacing the Timing Belt on the Ford Fiesta 1.0 Ecoboost
Guide to Replacing the Timing Belt on the Ford Fiesta 1.0 Ecoboost
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) The main steps today will show you how to dismantle and replace the timing belt on the Ford Fiesta 1.0 Ecoboost. To access the timing belt, it is adv…
How to Replace the Timing Belt on a Ford Fiesta?
How to Replace the Timing Belt on a Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) To replace the timing belt on a Ford Fiesta, access the left side of the engine block. Here, loosen the nuts securing the central pins of the cranksh…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos