Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Ford Focus remote control?

Model: Ford Focus MK 3 - Years 2011-2018
Part: Key

In this tutorial we can see how to replace the battery of the Ford Focus remote control, an extremely simple and fast operation. To do this, we will need a small screwdriver with a flat tip and a replacement battery of type CR2032. Let's start by extracting the emergency key by pressing the appropriate button, then locate the slot on the bottom edge, insert the screwdriver inside and, leveraging, separate the two halves of the remote control. Next, remove the old battery, place the replacement respecting the polarity and reassemble everything.

Posted on 12 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery of the Ford Focus?
How to Replace the Remote Battery of the Ford Focus?
Ford Focus (2011-2018 / MK 3) When the remote for your Ford Focus stops working, the cause is almost always a flat battery. To replace the remote battery of a Ford Focus, you must…
How to replace the battery of the Ford Focus remote control?
How to replace the battery of the Ford Focus remote control?
Ford Focus (2011-2018 / MK 3) .. In this tutorial we can see how to replace the battery of the Ford Focus remote control, an extremely simple and quick operation... …
Replacing the Key Battery for Ford Focus and Mondeo
Replacing the Key Battery for Ford Focus and Mondeo
Ford Focus (1998-2004 / MK 1) In this video, you will see how to replace the battery in the remote key of a Ford Focus, as well as in the Mondeo and other models from the manufact…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos