Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to enter the radio code on the Ford Transit

Model: Ford Transit MK 6 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Warning light – error code

See other generations:
Video tutorial

Today's guide will illustrate the steps to unlock the radio stations by entering the radio code for the Ford Transit. The radio code is usually found in the vehicle's manual, in the specific section for the radio; if not, it will be necessary to remove the radio and note down the code located on the label, so it is not forgotten if needed again.

At this point, turn on the radio and enter the code using the keypad; then confirm the code and wait a few seconds for all radio stations to be unlocked.


Updated on 3 October 2026 by ScegliAuto


Related tutorials

How to Remove the Original Radio from a Ford Transit
How to Remove the Original Radio from a Ford Transit
Ford Transit (2006-2014 / MK 7) How to remove the radio on a Ford Transit. Remove the radio using the removal keys, here’s how to do it. Insert the keys into the holes on the plasti…
How to Remove the Radio from a Ford Transit?
How to Remove the Radio from a Ford Transit?
Ford Transit (2014-2024 / MK 8) To remove the radio from your Ford Transit, start by sitting in the driver's seat. Next, look around the radio for small panels or grilles. These pan…
How to Unlock a Ford Radio Code?
How to Unlock a Ford Radio Code?
Ford Transit (2006-2014 / MK 7) Let's see how to unlock a Ford radio code on a Transit MK7: first, you need the serial number. Press buttons 1 and 6 (or 2 and 6 on 4500 RDS models) …

    Frequently Asked Questions

    • Transit 2014-2024 - Why does the brake light stay on after a pad change in a Ford Transit? Read answer
    • Transit 2014-2024 - How to reset the brake warning light on a Fort Transit? Read answer
    • Transit 2006-2014 - How do you reset the brake pad warning light on Ford Transit Custom? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos