Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Ford Kuga?

Model: Ford Kuga MK 2, C520 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Service warning light

See other generations:
Video tutorial

The procedure to reset the Service light on the Ford Kuga involves turning on the instrument panel and waiting for all messages indicating the resets to appear on the display. Once the messages have finished, you can proceed with the reset: to do this, press the brake and accelerator pedals fully three times and hold them down.

A message will appear on the display stating that the oil reset is in progress. After a few seconds, the reset of the light will occur, and you can complete the operation by turning off the ignition.


Updated on 4 October 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Ford Kuga
How to Reset the Service Light on a Ford Kuga
Ford Kuga (2012-2019 / MK 2, C520) To reset the service light on a Ford Kuga, ensure that the necessary servicing operations have been carried out at a garage for the vehicle's circula…
How to Reset the Service Light in a Ford Kuga?
How to Reset the Service Light in a Ford Kuga?
Ford Kuga (2008-2012 / MK 1, C394) This tutorial explains how to reset the service light in a Ford Kuga, a very simple and quick operation to perform only after completing all schedule…
How to Reset the Service Light on a Ford Kuga
How to Reset the Service Light on a Ford Kuga
Ford Kuga (2012-2019 / MK 2, C520) The procedure to manually reset the service light on your second generation Ford Kuga is quite simple. Below are the steps you need to follow. First,…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos