|
Do it yourself
| |||
| ||||
How to Start a Ford Ranger in Emergency When AdBlue Fault is Indicated
Model: Ford Ranger
T6, P375, PX
- Years:
2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Video tutorial
If your Ford Ranger won't start due to an AdBlue fault at 0 km, but you are in an emergency and need to leave at all costs, you have this option to do so. You only need a small piece of electric wire. Start the vehicle and put it in "P", pull the handbrake, and then open the front bonnet; disconnect the positive terminal of the battery. Also, open the fuse box in the engine compartment: be careful, it must be exactly as shown in the video to work the same way, otherwise, you will need to find the engine relay in the user manual. If it is the same relay, after connecting the copper wires of the electric cable to the positive terminal, remove the relay shown in the video, and place the other end of the electric wire into the central hole left free by the relay. The vehicle will start immediately.
Updated on 14 October 2026 by ScegliAuto
Related tutorials
Ford Ranger
(2022-2026 /
RA, P703)
In this short guide we will see the instructions that will allow us to disassemble and replace the front bumper grille of the Ford Ranger. First, we …
Ford Ranger
(2011-2023 /
T6, P375, PX)
To replace the battery of the Ford Ranger remote control, you need to press the button located on the top of the device, so that the key can be remov…
Ford Ranger
(2011-2023 /
T6, P375, PX)
In this video, we will see how to reset the AdBlue warning light on a Ford Ranger after correctly refuelling with AdBlue. The light did not reset its…
Other guides you may be interested in
|
Where to Find and How to Remove the Spare Wheel of a Peugeot 5008?
The spare wheel of a Peugeot 5008 is located under the rear of the vehicle. To remove it, you need to lift the third row of seats to access the fixing bolt that holds the spare wheel in position. Using the correct spanner, proceed to unscrew the fixing bolt until the wheel is no longer secured. At this point, you can extract the spare wheel from underneath the vehicle. Once you have completed this step, you are free to fit the spare wheel. Ensure you correctly remount the spare wheel and securely tighten the fixing bolt when you are finished. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.155
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |