Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Genesis
    3. :
  3. G80
    4. : 2020-2024 (MK 3, RG3)

Genesis G80 Years 2020-2024 (MK 3, RG3)

Genesis G80 (2020-2024 / MK 3, RG3)
How to replace the Genesis G80 battery
If we need to replace the battery on this car model, we will find simple instructions on how to behave and on the activities to be carried out in the …read all…
Posted on 10 June 2023 by ScegliAuto
Genesis G80 (2020-2024 / MK 3, RG3)
Where is the fuse box of the Genesis G80
In the following guide dedicated to your Genesis G80 third series (year 2020-2023) we will find out where all the various vehicle fuses are located. In this …read all…
Posted on 8 June 2023 by ScegliAuto
Genesis G80 (2020-2024 / MK 3, RG3)
How to replace the cabin filter in Genesis G80?
Replacing the cabin air filter, also known as the pollen filter, isn't complicated and in the case of a car like the Genesis G80 it doesn't even require the …read all…
Posted on 21 April 2023 by ScegliAuto
Genesis G80 (2020-2024 / MK 3, RG3)
How to replace the cabin air filter on the Genesis G80
If we need to replace the cabin air filter on the car, it is necessary to follow the simple steps below: access the cabin and sit on the passenger seat, the …read all…
Posted on 29 December 2022 by ScegliAuto
Genesis G80 (2020-2024 / MK 3, RG3)
How to replace the steering box of the Genesis G80?
In order to replace the steering box of the Genesis G80 you have to go and lift the machine so that you can loosen the fixing bolts of the steering rods. Then …read all…
Posted on 18 August 2022 by ScegliAuto
Genesis G80 (2020-2024 / MK 3, RG3)
How do you replace the thermostat on the Genesis G80?
In order to replace the thermostat of the Genesis G80 you have to open the hood, so that you have access to the components inside the engine compartment: on …read all…
Posted on 13 August 2022 by ScegliAuto
Genesis G80 (2020-2024 / MK 3, RG3)
How to change the engine oil in the Genesis G80?
In this tutorial we can see how to change the engine oil in the Genesis G80, very simple operation. First we open the hood and remove the top inlet cap, then …read all…
Posted on 4 June 2022 by ScegliAuto
Car stereo (2) Battery (2) Key (2) -board computer (1) Checks and maintenance (3) Brake discs (1) Air filter (2) Cabin air filter (3) Grille (1) Headlight bulb (1) Gear oil (1) Engine oil (2) Brake pads (1) Instrument cluster (1) Fuse box (2) Thermostat (1) Central tunnel (1)

See also:

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos