Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Genesis G90 key remote control battery replacement

Model: Genesis G90 MK 2 - Years 2016-2023
Part: Key

Below we will illustrate the steps on how to disassemble and replace the battery of the key remote control of the Genesis G90. First of all, we take our remote control in hand and start removing the physical key from the remote control; after which we use something thin and pointed to leverage the sides of the body, opening it in two parts, as shown in the video. At this point we remove the battery and replace it with the new one, of the right type (in this case a 3V CR 2032); let's insert it in the correct direction and let's insert it on the battery compartment, following the video until the end for reassembling the remote control!

Posted on 15 May 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery in the remote control of the Genesis G90?
How to replace the battery in the remote control of the Genesis G90?
Genesis G90 (2016-2023 / MK 2) As we can see in this tutorial, replacing the battery of the Genesis G90 remote control is an extremely simple and fast operation. To do this, we wil…
How to set the interior lights of the Genesis G90?
How to set the interior lights of the Genesis G90?
Genesis G90 (2016-2023 / MK 2) On the Genesis G90 it is possible to set the lights inside the passenger compartment both in terms of brightness and color. Through this video we can…
Genesis G90 gearbox oil change guide
Genesis G90 gearbox oil change guide
Genesis G90 (2016-2023 / MK 2) Today we will see, in this video tutorial, how to replace the automatic transmission oil on the Genesis G90, but also on the G80. First of all, we li…

Other guides you may be interested in

How to Remove the Front Headlight on Audi A4

How do you remove the front headlight on an Audi A4? Follow this detailed guide: Pull the plastic lever located at the bottom left of the dashboard, then lift the hood and secure it. Get a socket wrench (with the appropriate inserts), remove the top part of the bumper cover, then unscrew the screws around the front headlight. Disconnect the power connectors and replace the damaged bulbs (same size and voltage). To reassemble, proceed in reverse. Finally, test the proper operation of the lights.

Watch the video!


by ScegliAuto

More videos