Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install Deflectors on the Windows of the Genesis GV80

Model: Genesis Gv80 MK 1, JX1 - Years 2020-2026
Part: Body

If you plan to customize your vehicle by installing deflector profiles on the upper part of all four side windows, you need to purchase an aftermarket kit and follow these installation instructions. Take the first deflector and remove the protective film from the adhesive tape. Clean the area of the body where you will mount the deflector thoroughly, then press the deflector into place to ensure proper adhesion of the adhesive. Repeat the same procedure for installing the deflectors on the other three windows.

Updated on 26 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel in a Genesis GV80?
How to Remove the Door Panel in a Genesis GV80?
Genesis Gv80 (2020-2026 / MK 1, JX1) To remove the door panel in a Genesis GV80, unscrew the mounting screws located in the handle pocket and just behind the window switch panel. Once al…
How to Open the Rear Hatch of the Genesis GV80?
How to Open the Rear Hatch of the Genesis GV80?
Genesis Gv80 (2020-2026 / MK 1, JX1) To open the rear hatch of the Genesis GV80, you can use different methods: first, press the button located at the base of the rear windshield wiper; …
How to reset the service in the Genesis GV80?
How to reset the service in the Genesis GV80?
Genesis Gv80 (2020-2026 / MK 1, JX1) In this tutorial, we can see how to reset the service in the Genesis GV80, an extremely simple and quick operation, to be performed only once all sch…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos