Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Genesis
  4. :
  5. G90
  6. : How do I remove the Genesis G90 rear door panel?

Genesis G90 - Video tutorial

Model: Genesis G90 MK 2 - Years 2016-2023
Part: Door panel
Operation: How do I remove the Genesis G90 rear door panel?

In order to remove the Genesis G90 rear door panel, you need to unscrew the screws that fix it: these are positioned in the seat of the internal handle and on the armrest near the window regulator button. Once these screws have been loosened, it will be possible to detach the panel from the door, also disconnecting the connectors located inside it. When these too have been disconnected, it will be possible to completely remove the panel, replacing it with a new one. This must be properly connected and fixed with the screws removed previously.


Posted on 15 April 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos