Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Shock Absorber on a GMC Yukon?

Model: GMC Yukon Gmt900 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Shocks

See other generations:
Video tutorial

To replace the rear shock absorber on a GMC Yukon, lift the vehicle so you can loosen the bolts securing the corresponding wheel and remove it completely. After the wheel is removed, access the components at the rear by removing the inner wheel well cover.

This will allow you to unscrew the bolts securing the shock absorber at the top and bottom, fully removing it from its housing. After removal, install the new one, securing it properly.


Updated on 31 May 2026 by ScegliAuto


Related tutorials

How to Replace the Gas Springs on a GMC Yukon Trunk
How to Replace the Gas Springs on a GMC Yukon Trunk
GMC Yukon (2000-2006 / Gmt800) To replace the gas springs on the GMC Yukon trunk, open the rear hatch to access the support springs inside. To remove these springs, unscrew the bol…
How to Replace the Battery in a GMC Yukon
How to Replace the Battery in a GMC Yukon
GMC Yukon (2015-2020 / Gmtk2ug, Gmtk2uc) In this video tutorial, follow the step-by-step instructions on how to remove and replace the battery in a GMC Yukon. First, open the hood of your ve…
How to Replace the Headlight Bulb on a GMC Yukon
How to Replace the Headlight Bulb on a GMC Yukon
GMC Yukon (2007-2014 / Gmt900) This guide provides the main instructions to remove and replace the headlight and low beam bulb on a GMC Yukon. First, open the hood and start unscre…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos