Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Headlight Bulb on a GMC Yukon

Model: GMC Yukon Gmt900 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Headlight bulb

See other generations:
Video tutorial

This guide provides the main instructions to remove and replace the headlight and low beam bulb on a GMC Yukon. First, open the hood and start unscrewing the screws of the bumper grille using a 10 mm socket wrench; then, unscrew the headlight mounting screws and disconnect the bulb connectors, as shown in the video.

At this point, remove the bulb holder and then the bulbs, replacing them with new ones if necessary; finally, reassemble everything, following the video tutorial to the end!


Updated on 9 July 2026 by ScegliAuto


Related tutorials

GMC Yukon (2000-2006 / Gmt800) To replace the headlight bulb on a GMC Yukon, open the hood to access the components in the upper part of the engine compartment. You will find the s…
GMC Yukon (2015-2020 / Gmtk2ug, Gmtk2uc) In this video tutorial, follow the step-by-step instructions on how to remove and replace the battery in a GMC Yukon. First, open the hood of your ve…
GMC Yukon (2015-2020 / Gmtk2ug, Gmtk2uc) Replacing the key battery in your GMC Yukon (2015-2020) is one of the simplest tasks you can do on your own at any time. Below are all the necessary …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos