Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Lower Spoiler from the Front Bumper on the GMC Canyon

Model: GMC Canyon MK 2 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Body

See other generations:
Video tutorial

If you need to remove the lower plastic spoiler from the front bumper because it is damaged or worn due to impacts and contact with the ground, follow the detailed instructions provided here and refer to the video images as well. First, lift the vehicle from the front and locate all the screws securing the spoiler to the bumper around the perimeter.

Once all the screws are removed, you can extract the spoiler and proceed to reattach the screws to secure the side parts of the underbody, and the job will be complete.


Updated on 7 July 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on a GMC Canyon
How to Replace the Headlight Bulb on a GMC Canyon
GMC Canyon (2015-2022 / MK 2) To replace the headlight bulb on a GMC Canyon, open the hood to access the components in the engine compartment. Locate the protective cover over the…
How to Reset the Oil Light on a GMC Canyon
How to Reset the Oil Light on a GMC Canyon
GMC Canyon (2004-2012 / MK 1) To reset the engine oil light on your GMC Canyon, follow these few simple steps. First, get inside the vehicle and insert the key to turn on the inst…
How to Replace the Dome Light Bulbs of the GMC Canyon
How to Replace the Dome Light Bulbs of the GMC Canyon
GMC Canyon (2015-2022 / MK 2) This guide provides instructions to remove and replace the bulbs of the interior dome light of the GMC Canyon. First, get in the vehicle and start re…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos