Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the Badges from the Back of Our GMC Canyon

Model: GMC Canyon MK 2 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Body

See other generations:
Video tutorial

If you prefer the rear of your GMC Canyon cleaner and without the large lettering, you can remove them easily. Just get a body shop heat gun (a regular hair dryer will also work, but it will take longer) and heat the letters well.

Then, using a wire and some skill, remove the letters. Now, with a soft grinder mounted on a drill, remove the remaining adhesive from the body.

Use the side of the grinder for this. Clean thoroughly with a degreaser and a soft cloth.

Now apply polish, using the appropriate grinder. Perfect result!


Updated on 13 July 2026 by ScegliAuto


Related tutorials

How to Replace the Dome Light Bulbs of the GMC Canyon
How to Replace the Dome Light Bulbs of the GMC Canyon
GMC Canyon (2015-2022 / MK 2) This guide provides instructions to remove and replace the bulbs of the interior dome light of the GMC Canyon. First, get in the vehicle and start re…
How to Replace the Remote Battery in a GMC Canyon?
How to Replace the Remote Battery in a GMC Canyon?
GMC Canyon (2015-2022 / MK 2) Replacing the remote battery in a GMC Canyon, as shown in this tutorial, is an extremely simple and inexpensive task. To do this, you will need a rep…
How to Reset the Oil Service Light on a GMC Canyon?
How to Reset the Oil Service Light on a GMC Canyon?
GMC Canyon (2004-2012 / MK 1) In this tutorial, you will see how to reset the oil service light on the GMC Canyon pickup, a very simple and quick operation to perform only after c…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos