Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on a GMC Canyon

Model: GMC Canyon MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Service warning light

See other generations:
Video tutorial

To reset the engine oil light on your GMC Canyon, follow these few simple steps. First, get inside the vehicle and insert the key to turn on the instrument cluster.

Next, press the button located at the bottom of the speedometer multiple times until you see the oil life message. Once displayed, press and hold the same button for a few seconds and release it as soon as the reset is successfully completed.

At this point, just turn off the ignition or start driving.


Updated on 30 July 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery in a GMC Canyon?
How to Replace the Remote Battery in a GMC Canyon?
GMC Canyon (2004-2012 / MK 1) Replacing the remote battery in a GMC Canyon, as shown in this tutorial, is an extremely simple and quick task. For this, you will need a small flath…
How to Reset the Oil Service Light on a GMC Canyon?
How to Reset the Oil Service Light on a GMC Canyon?
GMC Canyon (2004-2012 / MK 1) In this tutorial, you will see how to reset the oil service light on the GMC Canyon pickup, a very simple and quick operation to perform only after c…
How to Replace the Dome Light Bulbs of the GMC Canyon
How to Replace the Dome Light Bulbs of the GMC Canyon
GMC Canyon (2015-2022 / MK 2) This guide provides instructions to remove and replace the bulbs of the interior dome light of the GMC Canyon. First, get in the vehicle and start re…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos