Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on a GMC Sierra

Model: GMC Sierra MK 4 - Years 2014-2018
Part: Battery

To replace the battery on this vehicle yourself, follow the instructions below and refer to the video. After opening the hood, locate the battery on the right side. Remove the crossbar above the battery and the side mounting bracket. Disconnect the negative terminal first, then the positive terminal. Next, remove the fuse box located above the battery, take out the old battery, and install the new one. Reconnect the positive terminal first, then the negative terminal after repositioning the fuse box, and finally reattach the mounting crossbars.

Updated on 13 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box located in the cabin of the GMC Sierra?
Where is the fuse box located in the cabin of the GMC Sierra?
GMC Sierra (2014-2018 / MK 4) In this new guide dedicated to all of you who own a GMC Sierra, we will discover the various steps you need to follow if you intend to locate the fus…
How to Replace the Remote Battery in a GMC Sierra?
How to Replace the Remote Battery in a GMC Sierra?
GMC Sierra (2014-2018 / MK 4) In this tutorial, you will see how to replace the battery in the remote for a GMC Sierra. For this simple task, you need a small flathead screwdriver…
How to replace the battery in the GMC Sierra remote control
How to replace the battery in the GMC Sierra remote control
GMC Sierra (2019-2026 / MK 5) If the remote control of your new GMC Sierra has suddenly stopped working and you are wondering how you can replace the battery inside it yourself, t…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos