Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What is the fuse diagram for the GMC Sierra?

Model: GMC Sierra MK 5 - Years 2019-2026
Part: Fuse box

In this video we can see where the fuse boxes are located in the GMC Sierra pickup and what their respective diagrams are, to consult in case we need to check the fuses of a malfunctioning device. We find both the first and the second box inside the cabin, one on the driver's side and the other on the passenger's side, both below the dashboard. The third and final box is instead located inside the engine compartment, protected by the plastic cover next to the battery. In case of a blown fuse, make sure to use a replacement with equivalent specifications and to operate with the vehicle turned off.

Posted on 16 January 2025 by ScegliAuto

Video tutorial

Related tutorials

What is the fuse diagram for the GMC Sierra pick-up?
What is the fuse diagram for the GMC Sierra pick-up?
GMC Sierra (2014-2018 / MK 4) In this video we can see where the fuse boxes of the GMC Sierra pick-up are located and what their respective diagrams are, useful in case we need to…
What is the fuse layout of the GMC Sierra pick-up?
What is the fuse layout of the GMC Sierra pick-up?
GMC Sierra (2019-2026 / MK 5) In this video we can see where the fuse boxes of the GMC Sierra pick-up are located and what are the corresponding diagrams, to consult in case we ne…
Where is the fuse box located in the GMC Sierra?
GMC Sierra (1999-2007 / MK 2) The GMC Sierra produced from 2003 to 2006 has the same fuse layout as the Chevrolet Silverado model 1. Both vehicles have two fuse boxes located insi…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos