Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Service on the GMC Yukon?

Model: GMC Yukon Gmt900 - Years 2007-2014
Part: Service warning light

In this tutorial, we will see how to reset the oil service on the GMC Yukon, a very simple operation to perform only after completing all required maintenance work. Start by inserting the key and turning on the vehicle. Then, using the directional buttons on the right side of the steering wheel, scroll through the display screens until you reach the one related to oil life. Once there, press the right arrow button and select "Yes" on the screen that appears. Restart the vehicle and check that the procedure was successful.

Updated on 26 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Service in a GMC Yukon?
How to Reset the Oil Service in a GMC Yukon?
GMC Yukon (2015-2020 / Gmtk2uc, Gmtk2ug) In this tutorial, you will see how to reset the oil service in a GMC Yukon, a very simple and quick operation that should only be done after completi…
How to Reset the Oil Light on a GMC Yukon
How to Reset the Oil Light on a GMC Yukon
GMC Yukon (2007-2014 / Gmt900) If you have just changed the engine oil in your GMC Yukon but the warning light won't turn off, you need to perform the following manual reset. First…
How to Reset the Oil Light on a 2011 GMC Yukon
How to Reset the Oil Light on a 2011 GMC Yukon
GMC Yukon (2007-2014 / Gmt900) If you want to manually reset the oil light on your 2011 GMC Yukon, follow this procedure. It only takes a few simple steps to complete. First, enter…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos