Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads of the GMC Savana?

Model: GMC Savana MK 2 - Years 2003-2024
Part: Brake pads

To replace the front brake pads of the GMC Savana, lift the vehicle using a jack or lift. This will allow you to loosen the bolts securing the wheel, so you can remove it and access the components behind. Here, you will find the brake caliper, which needs to be removed from its rotor by loosening the mounting bolts. This will allow the pads inside to be removed and replaced with new replacement parts. After the replacement, reinstall all the removed components.

Updated on 4 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight on a GMC Savana?
How to Replace the Headlight on a GMC Savana?
GMC Savana (1996-2002 / MK 1) To replace the headlight on a GMC Savana, loosen the screws around the headlight that secure it in its housing; once these screws are loosened, detac…
How to Replace the Remote Battery for the GMC Savana?
How to Replace the Remote Battery for the GMC Savana?
GMC Savana (1996-2002 / MK 1) Replacing the remote battery for the GMC Savana, as shown in this tutorial, is an extremely simple and quick task. To do this, you will need a flathe…
How to Change the Third Brake Light Bulb in the GMC Savana?
How to Change the Third Brake Light Bulb in the GMC Savana?
GMC Savana (1996-2002 / MK 1) To replace the third brake light bulb in the GMC Savana, you need a screwdriver to remove the two screws holding the light assembly in place. Once re…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos