Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on a GMC Yukon

Model: GMC Yukon Gmt900 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Brake pads

See other generations:
Video tutorial

To replace the front brake pads on a GMC Yukon, lift the vehicle with a jack so that the front wheel is off the ground. At this point, loosen the bolts that secure the wheel, remove it, and access the components at the back.

You can then loosen the screws that secure the caliper, removing it from the rotor and sliding out the pads positioned inside. After removing the old pads, insert the new ones and then secure the corresponding wheel.


Updated on 12 June 2026 by ScegliAuto


Related tutorials

How to Replace the Front Bumper Grille on the GMC Yukon
How to Replace the Front Bumper Grille on the GMC Yukon
GMC Yukon (2021-2026 / Gmt1yc) In this guide, discover the steps to remove and replace the front bumper grille on the GMC Yukon, following the instructions below. First, open the h…
How to Replace the Headlight Bulb on a GMC Yukon
How to Replace the Headlight Bulb on a GMC Yukon
GMC Yukon (2000-2006 / Gmt800) To replace the headlight bulb on a GMC Yukon, open the hood to access the components in the upper part of the engine compartment. You will find the s…
How to Replace the Rear Shock Absorber on a GMC Yukon?
How to Replace the Rear Shock Absorber on a GMC Yukon?
GMC Yukon (2007-2014 / Gmt900) To replace the rear shock absorber on a GMC Yukon, lift the vehicle so you can loosen the bolts securing the corresponding wheel and remove it comple…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos