Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a 2020 Holden Colorado

Model: Holden Colorado 7 MK 2 - Years 2011-2024
Part: Service warning light

In this new guide for your 2020 Holden Colorado (second generation), discover the steps to manually reset the service light that illuminates on the instrument panel. First, enter the cabin and turn the ignition to the second position. Next, press the "Menu" button located on the right lever of the steering wheel multiple times and find the "Oil life" option. At this point, press and hold the "Set/Clr" button for a few seconds, then confirm the reset of the light. Finally, turn off the ignition and you're done.

Updated on 24 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Holden Colorado
How to Reset the Service Light on a Holden Colorado
Holden Colorado 7 (2011-2024 / MK 2) In today's article, we will see how to reset the service light on a Holden Colorado. To reset the light, start the ignition without starting the engi…
How to Reset the Service Light on a Holden Colorado
How to Reset the Service Light on a Holden Colorado
Holden Colorado 7 (2011-2024 / MK 2) If the service light on your Holden Colorado 7 stays on even after you have performed the regular service, you can proceed with a manual reset to eli…
How to Reset the Service Light on a 2016 Holden Colorado
How to Reset the Service Light on a 2016 Holden Colorado
Holden Colorado 7 (2011-2024 / MK 2) Resetting the service light on a 2016 Holden Colorado is very simple. First, turn on the vehicle's ignition. Then, press the 'MENU' button located on…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos