Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Holden Captiva

Model: Chevrolet Captiva CG - Years 2006-2018
Part: Service warning light

The procedure shown in the video to reset the service light on a Holden Captiva requires specific steps. First, get inside the vehicle and insert the key into the ignition slot, turning it to the first position to power on the instrument cluster without starting the engine. Turn off the ignition and then turn it back on. Next, press the accelerator pedal all the way down three consecutive times. At this point, the reset will be complete, and to verify its success, simply turn off and then turn on the instrument cluster again.

Updated on 31 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a 2017 Holden Captiva
How to Reset the Service Light on a 2017 Holden Captiva
Chevrolet Captiva (2006-2018 / CG) If the service light on your 2017 Holden Captiva remains illuminated despite a recent service, follow this procedure to eliminate it permanently. Fir…
How to Reset the Service Light on a Holden Captiva
How to Reset the Service Light on a Holden Captiva
Chevrolet Captiva (2006-2016 / CG) To reset the service light on a first-generation Holden Captiva, get in the vehicle, insert the key, and turn it to the ON position to power the inst…
How to Reset the Service Light on a 2011 Holden Captiva
How to Reset the Service Light on a 2011 Holden Captiva
Chevrolet Captiva (2006-2016 / CG) The manual reset procedure for the service light on your 2011 Holden Captiva is very simple, and you will discover it below. First, get inside the ve…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos