Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal of the rear bumper of a Honda CR-V

Model: Honda CR-V MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Rear bumper

See other generations:
Video tutorial

In this very useful video tutorial today, we will see the entire procedure necessary to remove the rear bumper of a third-generation Honda CR-V. First, we need to open the rear trunk of the vehicle and remove the four fixing screws of the bumper, two on each side as shown in the video.

Then, we unscrew the three screws located under the wheel arch on each side to start detaching the bumper up to the height of the rear taillight.

After that, we remove the two plastic fixing clips located under the bumper to completely remove it and finish the job.


Posted on 14 March 2025 by ScegliAuto


Related tutorials

Removing the Front Bumper on a Honda CR-V
Removing the Front Bumper on a Honda CR-V
Honda CR-V (2002-2007 / MK 2) This video provides instructions for removing and replacing the front bumper on a Honda CR-V. First, open the bonnet and start by unscrewing and remo…
How to Remove the Front Bumper from a Honda CR-V?
How to Remove the Front Bumper from a Honda CR-V?
Honda CR-V (2007-2012 / MK 3) To remove the front bumper from a Honda CR-V, open the bonnet of the car to detach the rivets securing the bumper at the top. Once these rivets are r…
Installation of Parking Sensors
Installation of Parking Sensors
Honda CR-V (2007-2012 / MK 3) The installation of parking sensors requires the removal of the rear bumper: start by removing the internal covers of the boot to access the bumper f…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos