Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of Air Deflector on Front Bonnet

Model: Honda CR-V MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017
Part: Body

See other generations:
Video tutorial

Open the front bonnet and ensure it is securely supported. Insert the rubber plugs into the square holes located along the edge of the bonnet and clean the outer edge thoroughly.

At the locations of the newly installed rubber plugs, stick the 4 adhesive strips provided as a protective film and attach the support brackets for the deflector by screwing them into the respective plugs. Then, apply the deflector and secure it to the mounting brackets with the plastic pressure clips and tighten the locking screws.


Updated on 3 February 2026 by ScegliAuto


Related tutorials

Installation of Air Deflector on the Bonnet
Installation of Air Deflector on the Bonnet
Honda CR-V (2007-2012 / MK 3) Open the bonnet and thoroughly clean the edge with alcohol, removing any residues present. Then, apply the plastic inserts into the holes located ben…
Installation of Front Spoiler
Installation of Front Spoiler
Honda CR-V (2012-2017 / MK 4) Lift the vehicle on a hydraulic lift to facilitate the installation of the air deflector under the front bumper. First, remove the two pressure clips…
Installing Aeroskin on Front Bonnet
Installing Aeroskin on Front Bonnet
Honda CR-V (2012-2017 / MK 4) Before proceeding with the installation, thoroughly clean the front of the bonnet, where the aeroskin will be placed, with alcohol and degreaser (ant…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos