Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of Air Deflector on the Bonnet

Model: Honda CR-V MK 3 - Years 2007-2012
Part: Body

Open the bonnet and thoroughly clean the edge with alcohol, removing any residues present.
Then, apply the plastic inserts into the holes located beneath the edge of the bonnet, mark the position of the anchoring brackets, and stick the protective adhesive at the marked position.
Next, secure the brackets with the corresponding screws to the plastic plugs and install the deflector, securing it with the pressure clips or screws and sticking the spacers onto the bonnet.
Check the tightness of all screws and apply the adhesive provided inside the bonnet.

Updated on 3 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Installation of Air Deflector on Front Bonnet
Installation of Air Deflector on Front Bonnet
Honda CR-V (2012-2017 / MK 4) Open the front bonnet and ensure it is securely supported. Insert the rubber plugs into the square holes located along the edge of the bonnet and cle…
Installing Deflectors on Door Windows
Installing Deflectors on Door Windows
Honda CR-V (2012-2017 / MK 4) To install deflectors on the car doors, first fully lower the windows. Then, using a spatula, carefully pry out the seal in the areas where the brack…
Installation of Front Spoiler
Installation of Front Spoiler
Honda CR-V (2012-2017 / MK 4) Lift the vehicle on a hydraulic lift to facilitate the installation of the air deflector under the front bumper. First, remove the two pressure clips…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos