Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the side panel of the trunk in the Honda CR-V?

Model: Honda CR-V MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Checks and maintenance

See other generations:
Video tutorial

In this tutorial we can see how to disassemble the side panel of the trunk in the Honda CR-V, a very simple and quick operation. First of all, we open both the tailgate and the door on the side where we will be working, then we remove the trunk seal and lower the seat back.

We then remove the cover of the lower edge of the compartment, continue by removing the two lower side covers next to the seat and separate the panel from the wall. At this point, all that remains is to disconnect any connector from the socket and install the replacement following the reverse procedure.


Posted on 18 October 2025 by ScegliAuto


Related tutorials

How to Open a Stuck Boot Lid on a Honda CR-V?
How to Open a Stuck Boot Lid on a Honda CR-V?
Honda CR-V (2012-2017 / MK 4) On the Honda CR-V, the boot lid may become stuck, for example, due to a fault with the control button or the lock actuator. In this case, you can sti…
Installing the Rear Panel Protection on the Honda CR-V
Installing the Rear Panel Protection on the Honda CR-V
Honda CR-V (2012-2017 / MK 4) This guide shows how to install this beautiful chrome protection on the rear panel of the Honda CR-V boot. It is an accessory that can be purchased r…
Installation of Parking Sensors
Installation of Parking Sensors
Honda CR-V (2007-2012 / MK 3) The installation of parking sensors requires the removal of the rear bumper: start by removing the internal covers of the boot to access the bumper f…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos