Do it yourself
Frequently asked questions about cars and motorcycles

How to Install Door Bumpers

Model: Honda Civic MK 9 - Years 2012-2015
Part: Body

Need to install door bumpers? This guide will show you how to do it correctly. Obtain a piece of cardboard, thick enough to be reasonably rigid, 20/25 cm high and slightly shorter than a door. Use masking tape to secure it along the door trim perfectly, ensuring it is also secured at the top. Now take the door edge protectors and glue them to the bodywork, ensuring they adhere perfectly along the previously positioned cardboard. To ensure a good bond, press down on the protectors with a cloth, sliding it along them. You can remove the cardboard once the job is complete.
Honda Civic 4 DR.

Updated on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Honda Civic (1995-2001 / MK 6) This guide outlines the main steps to remove the front door panel of the Honda Civic. First, open the front door and start by removing the plastic co…
Honda Civic (2006-2012 / MK 8) In this short video, you will see all the step-by-step instructions to correctly and simply remove the front door panel on the eighth-generation Hond…
Honda Civic (2001-2006 / MK 7) In today's video, you will see how to remove the door of a Honda Civic. First, open the door and remove the bolt found in the door hinge; then discon…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos