Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure warning light on the Honda Civic.

Model: Honda Civic MK 11, FE, FL - Years 2022-2026
Part:

Let's see the instructions on how to reset the tire pressure warning light of the Honda Civic. Before performing the recalibration of the TPMS sensors, it is necessary for all four tires to be at the correct operating pressure. So, let's get inside the vehicle and start by turning on the instrument panel; then we use the steering wheel controls to navigate to the vehicle settings and then to the tire calibration option, confirming our selection as shown in the video. At this point, we turn off the instrument panel and start the engine, checking the reset of the TPMS!

Posted on 1 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the TPMS light of the Honda Civic.
How to reset the TPMS light of the Honda Civic.
Honda Civic (2016-2021 / MK 10) .. Today we will show you how to reset the tire pressure warning light on the Honda Civic. After checking that the tire pressure.. …
How to reset the tire warning light on the 2018 Honda Civic.
How to reset the tire warning light on the 2018 Honda Civic.
Honda Civic (2016-2021 / MK 10) To manually reset the tire warning light on your 2018 Honda Civic, simply follow the steps outlined in the following guide. First, you need to turn o…
How to reset the tire pressure warning light on the Honda Civic
How to reset the tire pressure warning light on the Honda Civic
Honda Civic (2016-2021 / MK 10) We will see below the instructions which will allow us to reset the tire pressure warning light on the Honda Civic; All four tires must be at operati…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos