Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS Light on Honda CR-V

Model: Honda CR-V MK 5 - Years 2017-2022
Part:

Let's see how to reset the TPMS light on the Honda CR-V: switch on the ignition and from the central display go to "home/settings/vehicle/TPMS calibration", select "calibration" and confirm when prompted. To complete, you need to drive for 15-20 minutes at a speed above 31 mph. The light will turn off automatically once the calibration is complete. For slightly older models, the procedure is performed using a physical button, which may be located under the steering wheel or inside the glove compartment. Switch on the ignition and hold the button until you see the TPMS light flash twice. At that point, the calibration has started. Again, you will need to drive for 20 minutes at a speed above 15 mph, and the light will turn off automatically.

Posted on 21 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Reset the Tyre Pressure Light on a Honda CR-V
How to Reset the Tyre Pressure Light on a Honda CR-V
Honda CR-V (2012-2017 / MK 4) How to reset the tyre pressure light on a Honda CR-V? Watch the video carefully. To reset the tyre pressure warning light, turn on the ignition of th…
How to reset the tire pressure sensor on a Honda CRV?
How to reset the tire pressure sensor on a Honda CRV?
Honda CR-V (2017-2022 / MK 5) To reset the tire pressure light on a Honda CRV, turn on the instrument panel without starting the engine. Use the central touchscreen to navigate to…
How to reset the tire pressure light on a 2007 Honda CR-V
How to reset the tire pressure light on a 2007 Honda CR-V
Honda CR-V (2007-2012 / MK 3) If you notice the appearance of the orange tire pressure warning light on the instrument panel of your 2007 Honda CR V, it means that there is a punc…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos