Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Change Light on a Honda Civic

Model: Honda Civic MK 7 - Years 2001-2006
Part: Service warning light

In this brief tutorial, we will see the entire procedure to reset the oil change light on a Honda Civic, seventh generation model produced from 2001 to 2006, a very simple operation that you can perform independently after changing the engine oil. Start the operation by pressing and holding the right button on the speedometer, then turn on the vehicle's ignition without starting the engine. Continue to hold the button until the oil change light turns off as shown in the video to complete the task. Finally, restart the vehicle to verify the success of the procedure.

Posted on 23 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Engine Oil Change Light on a Honda Civic
How to Reset the Engine Oil Change Light on a Honda Civic
Honda Civic (2016-2021 / MK 10) This tutorial video shows how to perform the reset procedure for the engine oil change light on a Honda Civic. First, get into the vehicle and turn t…
How to reset the TPMS light on a 2014 Honda Civic
How to reset the TPMS light on a 2014 Honda Civic
Honda Civic (2012-2015 / MK 9) The TPMS warning light activates on a Honda Civic vehicle when the tire pressure is not within the guidelines. This can happen due to tire wear from …
Oil change reset on a Honda Civic
Oil change reset on a Honda Civic
Honda Civic (2016-2021 / MK 10) .. In today's video, we will see how to reset the oil change light on a Honda Civic, tenth generation model produced from 2016 to 2021... …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos