Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil and Oil Filter Replacement

Model: Honda CR-V MK 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007
Part: Engine oil

See other generations:
Video tutorial

Raise the vehicle on suitable car ramps to access the oil sump. Open the front bonnet and ensure it is securely supported.

Unscrew the oil filler cap (this helps with draining), place an appropriate capacity container under the oil sump, and unscrew the drain plug located at the rear. Using a metal strap wrench, unscrew and remove the oil filter located beside the engine block; then fit the new filter after coating the gasket with oil (it is sufficient to tighten it by hand).

Tighten the oil sump plug and fill the engine with new oil according to the SAE specifications and the quantities indicated in the owner's manual.


Updated on 4 February 2026 by ScegliAuto


Related tutorials

How to Remove the Oil Filter on a Honda CR-V
How to Remove the Oil Filter on a Honda CR-V
Honda CR-V (2002-2007 / MK 2) Using a special oil filter wrench, unscrew the filter by turning it counterclockwise. Once unscrewed, pull upwards to remove it. At this point, turn …
Replacing Oil Filter on Honda CR-V
Replacing Oil Filter on Honda CR-V
Honda CR-V (2012-2017 / MK 4) How to replace the oil filter on a Honda CR-V? When replacing the filter, it is better to also replace the oil. Lift the car on a jack and unscrew th…
Replacing Oil Filter on Honda CR-V
Replacing Oil Filter on Honda CR-V
Honda CR-V (2002-2007 / MK 2) How to replace the oil filter on a Honda CR-V? When replacing the oil, it is advisable to also replace the filter. Lift the bonnet and secure it. Usi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos