Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Front Suspension Links

Model: Honda Civic MK 6 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001
Part: Suspension system

See other generations:
Video tutorial

Replacing the links that connect the stabiliser bar to the wishbone is a very simple task. To unscrew the nut securing the ball joint, you need to lock the ball joint pin by inserting an Allen key into the centre: then grip the nut with a socket spanner, secure the pin with the Allen key, and unscrew.

Once the nuts are removed, extract the old link and insert the new one, tightening using the same technique. The new links will make the ride more comfortable and safe, eliminating those annoying noises caused by the deterioration of the rubber bushes.


Updated on 6 February 2026 by ScegliAuto


Related tutorials

Front Shock Absorber Replacement
Honda Civic (2001-2006 / MK 7) Loosen the wheel nuts and lift the vehicle, securing it. Unscrew the bolts and remove the wheel. Unscrew and extract the retaining pins from the susp…
Replacement of Front Shock Absorber
Honda Civic (1995-2001 / MK 6) Loosen the wheel nuts and lift the vehicle, securing it safely. Unscrew the bolts and remove the wheel. Support the driveshaft with a hydraulic jack,…
Replacement of Worn Shock Absorbers
Replacement of Worn Shock Absorbers
Honda Civic (1992-1995 / MK 5) You only need an 18 mm socket spanner for this operation. Remove the wheel and unscrew the nut that secures one end of the shock absorber to the vehi…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos