Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Front Suspension Inspection

Model: Honda Civic MK 6 - Years 1995-2001
Part: Suspension system

To perform this maintenance, you need specific clamps to compress the shock absorber spring. Lift the vehicle using a hydraulic lift and remove the wheel; then detach the bolts securing the shock absorber to the hub and the bodywork. Position the shock absorber in the vice and compress the spring with the clamps; unscrew the upper support bolts and slide out the damper; loosen the clamps and remove the old spring. Slide the bellows off the damper and apply it to the new one; fit the new spring, compress it with the clamps, and secure the upper support after greasing it. Reinstall the suspension onto the vehicle.

Updated on 6 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Cause of hesitation in acceleration of the 2012 Honda Civic
Cause of hesitation in acceleration of the 2012 Honda Civic
Honda Civic (2012-2015 / MK 9) In this interesting video, it is pointed out what could be the reason for a defect that occurs with a certain frequency on the 2012 Honda Civic, both…
Removing the Front Bumper of the Honda Civic
Removing the Front Bumper of the Honda Civic
Honda Civic (2006-2012 / MK 8) This guide provides step-by-step instructions to remove and replace the front bumper of the Honda Civic. First, lift the vehicle with axle stands and…
How to Replace the Wishbone on a Honda Civic
How to Replace the Wishbone on a Honda Civic
Honda Civic (2001-2006 / MK 7) If you need to replace the suspension wishbone, lift the vehicle on a ramp and remove the front wheel for better access. Then disconnect the stabilis…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos