Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Honda
    3. :
  3. Civic
    4. : How do you bleed the Honda Civic brakes?

Honda Civic - Video tutorial

Model: Honda Civic MK 7 - Years 2001-2006
Part: Checks and maintenance
Operation: How do you bleed the Honda Civic brakes?

In order to bleed the brakes, you have to open the hood and remove the cap from the pump reservoir, to make sure that the fluid is at a sufficient level. Subsequently, it will be necessary to place a tray to collect the fluid under each brake that needs to be bled: the bleed screw is located in the rear part of the drum. An assistant will have to pump the brake pedal while opening the bleed screw: when the fluid has stopped flowing, the brake pedal can be released. The operation must be repeated on all four brakes, bearing in mind that the front ones are disc brakes and the bleed screw is on the caliper. At the end, it will be necessary to top up the liquid inside the special tank.


Posted on 25 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Civic 2012-2015 - What is the purpose of the PGM-FI light in the Honda Civic? Read Answer
    • Civic 2012-2015 - What does the PGM FI light indicate on the Honda Civic? Read Answer
    • Civic 2006-2012 - What does the Honda Civic tire pressure warning light mean? Read Answer
    • Civic 2012-2015 - How to troubleshoot the Honda Civic VSA system? Read Answer
    • Civic 2016-2021 - What to do if the maintenance light on the Honda Civic comes on? Read Answer
    • Civic 2012-2015 - Where are the Honda Civic service codes located? Read Answer

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos