Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Honda
    3. :
  3. Civic
    4. : Procedure for changing the engine oil

Honda Civic - Video tutorial

Model: Honda Civic MK 8 - Years 2006-2012
Part: Engine oil
Operation: Procedure for changing the engine oil

The following tutorial explains the method for changing the engine oil of a Honda Civic. The car is raised and secured on a jack. Newspapers and a collection tray are placed on the floor under the car at the oil pan. Using a ratchet wrench with an extension, unscrew the lower cap of the cup. The old oil will begin to drain; in the meantime, if needed, you can change the filter. A small amount of new oil can be added to the tank while the old oil is flowing out: it will clean the residues. Now close the lower cap of the sump and proceed to pour in the new oil (about 4 liters). Check the level with the dipstick and top up if necessary. Finally, close the top cap.


Posted on 22 July 2023 by ScegliAuto



Change engine oil and oil filter
Honda Civic (2006-2012 / MK 8) Apparently it may seem like a complex operation, but changing the oil is an operation that can be solved in a few steps. First you have to lift the f
Resetting the maintenance light on a 2008 Honda Civic.
Honda Civic (2006-2012 / MK 8) Let's see through this very useful video guide today how to reset the maintenance light, the light related to the remaining life of the engine oil, o
Change engine oil and filter
Honda Civic (2006-2012 / MK 8) Changing the oil and filter is an operation that you can do yourself and that it is advisable to do it, regardless of the mileage traveled, at least

    Frequently Asked Questions

    • Civic 2006-2012 - How much engine oil for the Honda Civic 2.2 diesel? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos