Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Power Steering Fluid Replacement

Model: Honda Civic MK 7 - Years: 2001, 2002, 2003, 2004, 2005, 2006
Part: Power steering fluid

See other generations:
Video tutorial

The materials needed for the job include special fluid, some tools, and a syringe. Open the reservoir cap. Place a container under the engine to catch the oil and lay down a plastic sheet.

Undo the oil cap on the reservoir pipe and let it drain completely. Start the engine and continue to draw out the old oil from the reservoir with the syringe until it is empty.

Close the cap and fill the reservoir with new oil. Start the engine and top up the oil to the maximum mark. Do not dispose of used oil in the environment; take it to the appropriate collection centres.


Updated on 8 February 2026 by ScegliAuto


Related tutorials

Changing Engine Oil and Oil Filter
Changing Engine Oil and Oil Filter
Honda Civic (2006-2012 / MK 8) Lift the vehicle with a jack and use axle stands to support it. Then, unscrew the drain plug from the oil sump (located at the rear of the sump, near…
Engine Oil and Oil Filter Replacement
Engine Oil and Oil Filter Replacement
Honda Civic (2012-2015 / MK 9) Lift the vehicle on suitable axle stands and position a container for collecting used oil under the oil sump: then undo the drain plug and wait for t…
Engine Oil and Oil Filter Replacement
Engine Oil and Oil Filter Replacement
Honda Civic (2006-2012 / MK 8) Drive the front wheels of the vehicle onto suitable ramps to facilitate access to the oil sump; place a wedge behind the rear wheel. Open the front b…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos