Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Bulbs on a Honda Jazz

Model: Honda Jazz MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Headlight

See other generations:
Video tutorial

This guide shows how to remove the front headlamp of the car. The first step is to loosen the fixing screw of the wheel arch on the side you are working on and the four fixing screws of the bumper, located above the front grille. Using a marker, mark the position of the two fixing tabs of the headlamp (inside the engine bay and indicated by two 10mm bolts).

At this point, by pulling the bumper slightly, you will find two more bolts to unscrew. Now you can pull the headlamp unit forward and, after disconnecting the main connector, the seal, and removing the metal clip, you can pull out the bulb (H4 type).

Check the correct operation of the lights before reassembling everything. Now simply follow the previous steps in reverse to reassemble the light unit (pay attention to the marks made earlier to realign the lights).

The operation is thus completed.


Updated on 5 May 2026 by ScegliAuto


Related tutorials

How to Replace the Front Bulbs in the Honda Jazz
How to Replace the Front Bulbs in the Honda Jazz
Honda Jazz (2008-2013 / MK 2) In today's video, see how to replace the front bulbs in the second generation Honda Jazz. First, purchase the specific bulbs needed, according to the…
Replacing Headlight Bulbs on Honda Jazz
Replacing Headlight Bulbs on Honda Jazz
Honda Jazz (2008-2013 / MK 2) Are the front headlight bulbs blown? Let’s remove the damaged bulbs and install new ones on the Honda Jazz. Open the bonnet by pulling the lever loca…
Replacing Front Position Bulb on Honda Jazz
Replacing Front Position Bulb on Honda Jazz
Honda Jazz (2008-2013 / MK 2) In this video tutorial, you will find instructions on how to remove and replace the front position bulb on a Honda Jazz. First, open and lift the bon…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos