Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of Aux Input Adapter

Model: Honda CR-V MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Accessory kit

See other generations:
Video tutorial

Installing an adapter for an Aux input in the factory car radio requires first removing the radio itself. Using a plastic lever, detach the climate control buttons (move the gear lever back to create more space: by removing the small cap on the gear lever's surround, you can access the button that allows the lever to move); similarly, detach the panel in the centre of the dashboard, behind the air vents, and then the vents themselves.

At this point, unscrew the fixing screws of the radio, pull it forward, and connect the adapter plug in the designated slot; configure the device, and finally position the control unit, wiring, and Aux output in the best way.


Updated on 10 February 2026 by ScegliAuto


Related tutorials

Installation of Bluetooth Device Adapter
Installation of Bluetooth Device Adapter
Honda CR-V (2007-2012 / MK 3) Installing a Bluetooth device adapter is straightforward and does not require special skills or tools. You must first remove the original radio to co…
How to adjust the time in the Honda CR-V?
How to adjust the time in the Honda CR-V?
Honda CR-V (2012-2017 / MK 4) In this tutorial we can see how to adjust the time in the Honda CR-V, an extremely simple and quick operation, to be carried out for example after th…
Installation of Rubber Boot Mat
Installation of Rubber Boot Mat
Honda CR-V (2002-2007 / MK 2) This video illustrates how to correctly install a rubber boot mat for your vehicle. If you are concerned about dirtying or damaging the carpet in you…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos