Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Cleaning Engine Components and Injectors

Model: Honda Civic MK 6 - Years 1995-2001
Part: Engine

This video shows how to perform a basic cleaning of the internal engine components and injectors worn from use and time. First, obtain the suitable product for your purpose and insert it directly into the intake duct or add it to your fuel. Then, start the engine and let it idle, allowing the product to act within the engine. An effect of the product is the release of a large amount of white smoke from the exhaust; once the white smoke has finished, all the product has been consumed and burned by the engine.

Updated on 11 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Dismantling and Cleaning the EGR Valve
Dismantling and Cleaning the EGR Valve
Honda Civic (2001-2006 / MK 7) The EGR valve is exposed to exhaust gases that generally contain oil particles and unburnt diesel, which tend to clog the valve: therefore, a simple …
How do you replace the spark plugs on the Honda Civic?
How do you replace the spark plugs on the Honda Civic?
Honda Civic (2006-2012 / MK 8) In order to replace the spark plugs on the Honda Civic, you have to open the hood, so that you can unscrew the bolts that secure the plastic cover of…
How to Replace an Engine Air Filter
How to Replace an Engine Air Filter
Honda Civic (2006-2012 / MK 8) The car's air filter is essential for filtering and cleaning the air drawn from outside into the combustion chamber. Without a filter, there's a risk…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos