Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Manually Set the Time on the Honda Amaze

Model: Honda Amaze MK 2 - Years 2018-2025
Part: Clock

To manually change the time displayed on the dashboard of your Honda Amaze Mk2, follow the steps in this mini guide. First, insert the key and turn on the ignition. Next, press the button located at the top of the dashboard multiple times until the time starts to flash. At this point, rotate the same button used earlier clockwise to advance the time or counterclockwise to go back with the minutes and hours. Finally, press the button once more to save the changes.

Updated on 19 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Shock Absorber on a Honda Amaze?
How to Replace the Rear Shock Absorber on a Honda Amaze?
Honda Amaze (2013-2020 / MK 1) To replace the rear shock absorber on a Honda Amaze, lift the car so that the rear wheel corresponding to the shock absorber to be removed is not in …
How to Replace the Key Battery of the Honda Amaze
How to Replace the Key Battery of the Honda Amaze
Honda Amaze (2013-2020 / MK 1) Replacing the key battery of your Honda Amaze (Mk1) brings the key back to life at a very low cost and in just a few seconds. Let's discover the vari…
How to Replace the Engine Oil and Oil Filter of the Honda Amaze
How to Replace the Engine Oil and Oil Filter of the Honda Amaze
Honda Amaze (2018-2025 / MK 2) Follow these steps to replace the engine oil and oil filter of the Honda Amaze in simple and quick steps. First, lift the vehicle and start draining …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos