|
Do it yourself
| |||
| ||||
Airbag Warning Light Reset Instructions
Model: Honda Civic
MK 6
- Years:
1995, 1996, 1997, 1998, 1999, 2000, 2001
Video tutorial
The SRS system includes the following components: driver’s front airbag module; passenger’s front airbag module; side airbag module; curtain airbag module; retractor group with pretensioner; airbag warning light; SRS control unit; side impact sensors; passenger’s front airbag ON/OFF indicator; passenger’s front airbag non-operational indicator. When the ignition switch is in the ON position, the control unit continuously monitors parameters to determine if a frontal or near-frontal impact is severe enough to require the deployment of the airbags or the seatbelt pretensioners. Generally, when the ignition switch is turned to the ON position, the SRS airbag warning light on the dashboard illuminates for about 5 seconds before turning off: if it remains illuminated, the control unit may have stored a fault in the system; to reset it, a diagnostic tool is not necessary, but it is sufficient to create a bridge in the yellow connector located under the steering column.
Updated on 11 February 2026 by ScegliAuto
Related tutorials
Honda Civic
(1995-2001 /
MK 6)
If the airbag warning light comes on inadvertently or because an airbag has deployed, to reset it, proceed as follows. Obtain two simple pieces of ri…
Honda Civic
(1995-2001 /
MK 6)
If the airbag warning light inadvertently comes on or because an airbag has deployed, resetting it requires a complex operation. First, obtain two si…
Honda Civic
(2006-2012 /
MK 8)
In this video tutorial, you will see how to reset the airbag warning light that has illuminated on the Honda Civic. First, get inside the vehicle and…
Other guides you may be interested in
|
How to Reset the Tyre Light on a Toyota Aygo?
To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.116
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |