Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Honda
    3. :
  3. Civic
    4. : How to change the control unit of the Honda Civic

Honda Civic - Video tutorial

Model: Honda Civic MK 7 - Years 2001-2006
Part: Control unit
Operation: How to change the control unit of the Honda Civic

In this guide, we will see how to disassemble and replace the engine control unit of the Honda Civic, following the instructions below. First, we open the hood of our car and proceed to disconnect the battery as a precautionary measure. Then, we unscrew the fixing screws of the control unit, which can be found next to the battery, as shown in the video. After that, we disconnect the electrical wiring to remove it from the engine compartment, replacing it with the new one (installing the original control unit). We reassemble it and make the connection, following the video tutorial until the end!


Posted on 29 July 2023 by ScegliAuto



How to replace the Honda Civic ECU?
Honda Civic (2006-2012 / MK 8) In order to replace the Honda Civic ECU, you need to open the hood to access the engine compartment and remove the battery located in correspondence
How to replace the Honda Civic remote control battery?
Honda Civic (2012-2015 / MK 9) In this tutorial we can see how to replace the Honda Civic remote control battery, a very simple and fast operation. To do this, we will need a repla
How to replace the Honda Civic remote control battery?
Honda Civic (2006-2012 / MK 8) In this video we can see how to replace the Honda Civic remote control battery. For this simple operation, we need a small Phillips screwdriver, a fl

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos