Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from the Honda Accord MK7

Model: Honda Accord MK 7 - Years: 2002, 2003, 2004, 2005, 2006, 2007
Part: Car stereo

See other generations:
Video tutorial

Today, follow this guide to remove and replace the original radio of the Honda Accord seventh generation. First, get inside the vehicle and start by removing the side plastics of the dashboard using a plastic lever; then remove the air vents and unscrew the screws located underneath, as shown in the video.

At this point, take off the gear knob cover and the climate control panel; finally, remove the radio by disconnecting the electrical connectors at the back, following the video to the end!


Updated on 28 May 2026 by ScegliAuto


Related tutorials

Where is the radio fuse located in the Honda Accord?
Honda Accord (2002-2007 / MK 7) If the radio in your Honda Accord has suddenly stopped working, the first thing to do is check the status of the respective fuse, the location of whi…
How to Unlock the Radio of a Honda Accord MK7
How to Unlock the Radio of a Honda Accord MK7
Honda Accord (2002-2007 / MK 7) Let's see how to unlock the radio of a Honda Accord MK7 (this procedure is valid for many makes and models). Turn on the ignition. The code is found …
How to Dismantle and Replace the Honda Accord Radio
How to Dismantle and Replace the Honda Accord Radio
Honda Accord (2012-2017 / MK 9) Today's instructions will show you the main steps to dismantle and replace the radio in the Honda Accord. First, get inside the cabin and start by re…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos