Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Oil Filter of the Honda Passport

Model: Honda Passport YF7, YF8 - Years 2019-2026
Part: Engine oil

Discover step-by-step instructions for performing routine maintenance by replacing the engine oil and oil filter of the Honda Passport. First, lift the vehicle and drain the engine oil by unscrewing the bolt with a socket wrench; let it drain into a container for about ten minutes. Next, unscrew the oil filter cartridge located next to the oil pan, hand-tightening the new oil filter; finally, unscrew the fill cap and top off, checking the level with the dipstick!

Updated on 1 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Honda Passport?
How to Reset the Service Light on a Honda Passport?
Honda Passport (2019-2026 / YF7, YF8) In this tutorial, you will see how to reset the service light on a Honda Passport. Before proceeding with this simple operation, make sure you have c…
How to Reset the Service Light on the Honda Passport?
How to Reset the Service Light on the Honda Passport?
Honda Passport (2019-2026 / YF7, YF8) In this tutorial, you will see how to reset the service light on the Honda Passport. Before proceeding with this simple and quick operation, ensure t…
How to Replace the Key Battery of the Honda Passport
How to Replace the Key Battery of the Honda Passport
Honda Passport (1997-2002 / Ck58, Cm58, Dm58) To replace the old button cell inside your Honda Passport key, follow these simple and quick steps. Just follow the instructions below and put them i…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos