Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Fuel Filler Cap on the Honda Jazz?

Model: Honda Jazz MK 3 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Fuel cap

See other generations:
Video tutorial

In this tutorial, you will see how to open the fuel filler cap on the Honda Jazz, a very simple operation that follows the typical procedure for most vehicles. First, unlock the locks using the appropriate button on the remote, then open the driver's door, locate the lever depicting a fuel pump at the bottom of the dashboard, and activate it. Next, go to the fuel filler cap and open it fully.

Once refuelling is complete, close the cap by pressing it gently.


Updated on 26 September 2026 by ScegliAuto


Related tutorials

How to Open the Boot Lid of the Honda Jazz
How to Open the Boot Lid of the Honda Jazz
Honda Jazz (2013-2019 / MK 3) Today's guide will show you how to open the rear boot lid of the Honda Jazz in simple steps. To open the rear boot manually, first unlock the door lo…
How to Remove the Boot Lid on a Honda Jazz?
How to Remove the Boot Lid on a Honda Jazz?
Honda Jazz (2008-2013 / MK 2) In this tutorial, you will see how to remove the boot lid on a Honda Jazz, a very simple operation. Start by unclipping the right panel of the boot a…
How to Replace the Fuel Filter in the Honda Jazz?
How to Replace the Fuel Filter in the Honda Jazz?
Honda Jazz (2008-2013 / MK 2) To replace the fuel filter in the Honda Jazz, remove the screws securing the centre console and take out the console itself. Underneath, there will b…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos