Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Spark Plugs from a Hyundai Accent

Model: Hyundai Accent RB, RC, MK 4 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Spark plugs

See other generations:
Video tutorial

Want to remove the spark plugs from your Hyundai Accent? Follow this video to do it. Pull the engine compartment release lever and lift the bonnet, securing it. Remove the plastic soundproofing panel covering the engine, then disconnect the terminals from the coils by hand, unscrew the coils with your socket spanner, and pull them out of the cylinder head.

Take the new spark plugs and guide them with the extension of the socket spanner into the engine head, tighten them and reconnect the respective power terminals.

Finally, refit the soundproofing panel and close the engine cover.


Updated on 27 February 2026 by ScegliAuto


Related tutorials

How to Replace the Ignition Switch on a Hyundai Accent
How to Replace the Ignition Switch on a Hyundai Accent
Hyundai Accent (2010-2017 / RB, RC, MK 4) To replace the ignition switch on a Hyundai Accent, turn the steering wheel to access the screws at the rear: this will allow you to detach the plast…
How to Reset the Tyre Pressure Warning Light on the Hyundai Accent?
How to Reset the Tyre Pressure Warning Light on the Hyundai Accent?
Hyundai Accent (2005-2009 / MK 2, MC) The procedure to reset the tyre pressure warning light on the Hyundai Accent starts by inflating the tyres to the recommended pressure value: this is…
How to Reset the Tyre Pressure Warning Light on a Hyundai Accent
How to Reset the Tyre Pressure Warning Light on a Hyundai Accent
Hyundai Accent (2010-2017 / RB, RC, MK 4) To reset the tyre pressure warning light on the Hyundai Accent, first inflate the tyres to the recommended pressure value: this value is stated on th…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos