Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Kona
    4. : How to replace the remote control battery of a Hyundai Kona

Hyundai Kona - Video tutorial

Model: Hyundai Kona MK 1 - Years 2017-2023
Part: Key
Operation: How to replace the remote control battery of a Hyundai Kona

How to replace the battery in the remote control key of a Hyundai Kona? Let's see in this video in detail how to do it: take our remote control and press the button to release the metal key. Once extracted we go with a lever to separate the two covers as in the video. Unscrew the screws on the battery holder with a small screwdriver. We extract the worn battery from the housing, let's take a new one of the same size and voltage. We reassemble the plastic battery holder with attached fastening screws and close the remote control cover. Finally, we check the exact functioning of the same.


Posted on 18 October 2023 by ScegliAuto



How to change the battery of the remote key in the Hyundai Kona
Hyundai Kona (2017-2023 / MK 1) Below we will see the step-by-step instructions for disassembling and replacing the remote control battery of the Hyundai Kona key. First of all, we
How to replace the remote control battery on Hyundai Kona
Hyundai Kona (2017-2023 / MK 1) In this short tutorial we can see the simple steps of how to replace the remote control battery on a Hyundai Kona. To begin we must press the release
How to replace the Hyundai Kona remote control battery
Hyundai Kona (2017-2023 / MK 1) Let's see in this short and simple video tutorial how to replace the key battery of a Hyundai Kona. First we need to extract the physical key from th

    Frequently Asked Questions

    • Hyundai Kona 2017-2023 - Why is the electronic key of the Hyundai Kona not recognized? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos