Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Key Battery of a Hyundai Tucson

Model: Hyundai Tucson NX4, MK 4 - Years 2022-2026
Part: Key

Replacing the battery in the remote for a Hyundai Tucson is a simple task. Locate the small release button on the key, press it, and extract the metal emergency blade. Using a flathead screwdriver, pry open the remote shell. The battery is a CR2032, which is easily obtainable. Remove the old battery using the screwdriver, taking care to note the orientation: the positive (+) side should face upwards. Insert the new battery and close the remote by pressing until you hear a click. Reinsert the metal key and check the operation of the buttons. This is a quick job that takes only a few minutes.

Posted on 2 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Key Battery on Hyundai Tucson
How to Change the Key Battery on Hyundai Tucson
Hyundai Tucson (2004-2009 / JM, MK 1) How do you change the battery in the key of a Hyundai Tucson? Let's see how to disassemble the remote and replace the battery inside. Take your remot…
How to Change the Battery on a Hyundai Tucson
How to Change the Battery on a Hyundai Tucson
Hyundai Tucson (2015-2021 / TL, MK 3) To change the battery on a Hyundai Tucson, start by removing the clips that hold the air tube in place, then remove the air tube. Unscrew the battery…
How to Change the Battery in the Hyundai Tucson Key Fob
How to Change the Battery in the Hyundai Tucson Key Fob
Hyundai Tucson (2004-2009 / JM, MK 1) Let's see how to change the battery in a smart key for the Hyundai Tucson. Press the small side button located near the base of the key and pull out …

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos