Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Headlight Bulbs on a Hyundai i10

Model: Hyundai I10 PA, MK 1 - Years 2007-2013
Part: Headlight bulb

Replacing the bulbs on this vehicle is very simple and quick, although it is necessary to dismantle and remove the entire lighting unit. Start by loosening the screws that secure the headlight on the upper side, as well as the black plastic part that overlaps the central grille. Once done, the headlight will slide out easily, but remember to disconnect the cable connector. Now that you have removed the entire headlight, open the central slot by removing the plastic cap that is simply screwed on. From here, disconnect the bulb connector and rotate the clips that hold it in place, and there you go, job done.

Updated on 18 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Headlight Bulbs on Hyundai I10
Replacing Headlight Bulbs on Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) Are the bulbs in your Hyundai I10 damaged? Here’s how to change them inside the front headlight. Open the front bonnet by pulling the lever located a…
Removing the Front Headlight on the Hyundai I10 MK1
Removing the Front Headlight on the Hyundai I10 MK1
Hyundai I10 (2007-2013 / PA, MK 1) In this short video, you will learn how to remove the front headlight and replace its bulbs on the Hyundai I10 first series, following these simple s…
Replacing the Bulbs in the Front Headlight of a Hyundai i10
Replacing the Bulbs in the Front Headlight of a Hyundai i10
Hyundai I10 (2013-2020 / IA, MK 2) Let's replace the bulbs in the front headlight of a Hyundai i10. Here’s how to proceed: Open the bonnet by pulling the lever located at the bottom ri…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos