Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Elantra
    4. : Pollen filter replacement

Hyundai Elantra - Video tutorial

Model: Hyundai Elantra HD, MK 4 - Years 2006-2010
Part: Cabin air filter
Operation: Pollen filter replacement

The pollen filter purifies the air in the passenger compartment and is located under the glove compartment on the passenger side. Obtain the pollen filter of the same model identical to the original and to access the removal it is necessary to remove the two lateral stops inside the glovebox and unhook the flap. The filter is located in the compartment behind the door. Once the filter cover has been removed, remove the filter only by carefully pulling it outwards to avoid dispersion of dust. To do this, put a cloth on the bottom to collect the dirt. Put the new filter back into its housing and close the lid carefully.


Posted on 6 July 2023 by ScegliAuto



Engine oil filter replacement
Hyundai Elantra (2006-2010 / HD, MK 4) In order to access the engine oil filter seat, it is first necessary to remove the plastic cover on the engine itself: the filter is located right ne
Cabin air filter removal and replacement
Hyundai Elantra (2006-2010 / HD, MK 4) This video shows us how to remove and replace the cabin air filter of our car with a few simple steps. First we need to find where the cabin air filt
Engine air filter replacement
Hyundai Elantra (2000-2006 / MK 3, XD) The air filter is a component of the fuel system of our car and is used to filter and therefore clean the air that is channeled from the outside and

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos