Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuel Filter Replacement on Tucson

Model: Hyundai Tucson JM, MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009
Part: Diesel fuel filter

See other generations:
Video tutorial

Let's replace the diesel filter on a Hyundai Tucson. Lift the front bonnet and identify the components to remove to access the diesel filter.

Unscrew the bolt securing (you can also use a socket spanner) the ventilation pipe and remove the kit, then remove the power battery located near the container where the diesel filter is situated for easier access. Once the battery is removed, take out the filter container from the vehicle (replace it with a new one). Fit the new filter (connect the electrical terminals and various circulation hoses).


Updated on 3 April 2026 by ScegliAuto


Related tutorials

How do you open the fuel door of the Hyundai Tucson when it is stuck?
How do you open the fuel door of the Hyundai Tucson when it is stuck?
Hyundai Tucson (2022-2026 / NX4, MK 4) In order to open the fuel door of the Hyundai Tucson when it is stuck, you need to open the rear hatch so that you can access the inside of the trunk…
How to Open the Fuel Flap and Unscrew the Cap on a Hyundai Tucson
How to Open the Fuel Flap and Unscrew the Cap on a Hyundai Tucson
Hyundai Tucson (2015-2021 / MK 3, TL) The instructions in this guide will show you how to refuel by opening the fuel flap and unscrewing the tank cap on a Hyundai Tucson. First, get into …
Replacing the Diesel Filter on the Hyundai Tucson MK1 2.0 CRDI
Replacing the Diesel Filter on the Hyundai Tucson MK1 2.0 CRDI
Hyundai Tucson (2004-2009 / JM, MK 1) In this tutorial, you will learn how to remove and replace the diesel filter on the first generation Hyundai Tucson with a 2.0 CRDI engine. First, op…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos